#pmieconf-rules 1
# --- DO NOT MODIFY THIS FILE --- see pmieconf(5)
#

rule	per_netif.packets
	default = "$rule$"
	enumerate = hosts
	predicate =
"some_inst (
    network.interface.total.packets $hosts$ $interfaces$ >
	$threshold$ count/sec
)"
	enabled	= no
	version	= 1
	help	=
"For at least one network interface, the average rate of packet
transfers (in and/or out) exceeded the threshold during the last
sample interval.
This rule is disabled by default because the per_netif.util rule
is more generally useful as it takes into consideration each
network interfaces' reported bandwidth.  However, there are some
situations in which this value is zero, in which case an absolute
threshold-based rule like this one will make more sense (for this
reason it should typically be applied to some network interfaces,
but not others - use the \"interfaces\" variable to filter this).";

string	rule
	default = "High network interface packet transfers"
	modify	= no
	display	= no;

double	threshold
	default	= 2000
	help	=
"Threshold in units of packets (in or out) per second per interface.
A tolerable value depends on the type of network interface and
the packet size; some experimentation may be required to find
an accpetable threshold.";

instlist	interfaces
	default	=""
	help	=
"May be set to a list of network interfaces for which the rule will
be evaluated, as a subset of configured network interfaces.
Network interfaces should be separated by white space and may be
enclosed in single quotes, eg.  \"ec0 'xpi5' ec2\".  Use the command:
	$ pminfo -f network.interface.mtu
to discover the names of the installed network interfaces.
This is most useful to remove the loopback, SLIP and PPP interfaces
from the rule evaluations.";

string	action_expand
	default = "%vpkt/s[%i]@%h"
	display = no
	modify  = no;

string	email_expand
	default	= "host: %h interface: %i packets/sec: %v"
	display	= no
	modify	= no;

#
# --- DO NOT MODIFY THIS FILE --- see pmieconf(5)